Collection
Silicone condensation HT 60 Set - Hard
✔ Very Hard, Heat resistant up to 380 ° C
✔ Red, Liquid, Non-Bleeding
✔ Shore (A) 60
✔ Low shrinkage (<0.8%)
✔ 40 minutes of working time
✔ Mixing ratio. (Weight) 100: 2€ 45,95 € 37,98 Excl. tax
CompareRelease Agent Spray 0,75g/cm³
✔ Release spray for silicone
✔ Provides a good release
✔ Matting
✔ Wax-based
✔ 0.75 g / cm³€ 16,50 € 13,64 Excl. tax
CompareSilicone Addition Pink 10
✔ Flexible, Strong
✔ Pink
✔ Shore (A) 10 (Soft)
✔ Low shrinkage (<0.1%)
✔ 40 minutes of working time
✔ Mixing ratio (Weight) 100: 100€ 36,25 € 29,96 Excl. tax
CompareSilicone Addition Yellow 25 Set
✔ Flexible, Strong
✔ Yellow
✔ Shore (A) 25 (Moderately Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 31,50 € 26,03 Excl. tax
CompareSilicone Addition Green 30 Set
✔ Flexible, Strong
✔ Green
✔ Shore (A) 30 (Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 31,50 € 26,03 Excl. tax
CompareTalcum Powder Finntalc M-30-sq
Talcum Powder is a multifunctional material that can be used for many purposes. The powder is ideal to eliminate the non-slipping character of silicone, but can also be used for a fine discharge between two layers of addition silicone .
€ 1,95 € 1,61 Excl. tax
CompareLightweight Malleable Epoxy
The Lightweight malleable epoxy is a very light and strong kneadable epoxy that is widely used for making models or maquettes.
€ 12,50 € 10,33 Excl. tax
CompareWax Brush wax
Brush wax is a perfect wax for setting up a detailed wax layer in a small to very large mold. The wax is brushed with a brush.
€ 11,95 € 9,88 Excl. tax
ComparePolyurethane Crystal Clear 1200
Polyurethane Clear 1200 is a crystal-clear two-component Poly Urethane molding system, which is UV Stable.
€ 89,50 € 73,97 Excl. tax
CompareUltraCast XT Epoxy Crystal Clear
Ultra Cast XT is an epoxy resin which once cured gives a very clear results with a heat resistance up to 90°C.
€ 48,50 € 40,08 Excl. tax
Compare
