Filler PU
Filler PU
++BLUE++ With PU you can increase the maximum casting thickness of the PU casting system D80 to 80 mm instead of 30 mm. ++ENDBLUE++
Description
PU was added to a poly urethane casting system increases the rigidity of the PU (In PU casting system D80, for example, the shore will increase from 70 Shore A to a maximum of 85). The maximum casting thickness of the PU casting system D80 is 100 mm instead of 30 mm when you add this filler.
This filler is self-extinguishing and gives this property partly with the PU in which the filler is mixed.
The addition of PU prolongs the processing time of 5 to 10 minutes and increases the demould time from 50 minutes to 180 minutes. A small amount of filler will make the PU stronger. Too much filler, however, makes the PU brittle (but increases stiffness).
Processing
The maximum ratio in a normal polyurethane casting system is Polyol: Isocyanate: PU is 1: 1: 3
Packaging
In bags of 1.5 kg or 25 kg.
Shelf life
If stored in a dry location this filler has an indefinite shelf life.
++DOWNLOADS++
| Document | Download |
| Product Information |  |
++USP++
- Extend the processing time
- Pour Thickness increase to 80mm
- flame retardant effect
