Release agent (spray)
Release agent (spray)
++BLUE++ This spray does not contain silicone. ++ENDBLUE++
Description
This release spray is ideal for the treatment of surfaces which are (slightly) porous or whereby the possibility exists that silicones might adhere (mechanically or chemically. The spray can also be applied to the silicone mold itself to facilitate silicone molds made from multiple silicone parts or to release castings from the silicone mold.
Processing
The best results are obtained by covering the entire surface with a fine layer. Give the product a few minutes to dry before casting the silicon onto it.
Special instructions
Make sure that you covered the entire surface without missing segments. The silicone will possibly adhere to segments without release agent.
Packing
The silicone release spray comes in a spraying can of 500 ml.
Shelf life
At least 3 years.
Safety
Do not expose the container to temperatures above 50 degrees. Do not crush or puncture the (empty) can nor throw it into the fyer. Product is to be stored outside the reach of children.
Product is hazardous for the environment, flammable, irritating to skin, irritating to water organism contains butane and propane.
++DOWNLOADS++
| document Type | download |
| sheet |  |
++USP++
- Easy spraying action
- Good release
- Not visible
