Create Your Own Dildo Set
This set contains all the ingredients to create your own dildo.
Making your own dildo is lots of fun and it's quick and easy!
- Make the shape you want by kneading plasticine the way you want it. Try to keep the shape a little conical / tapered as this will facilitate the demoulding of the plasticine shape out of the alginate mould.
- Mix the alginate in a mixing cup of 1900 ml. Please read the data sheet for all tips and tricks. Make sure you use a mixing ratio alginate : water = 1 :3. This means you should use 100 grams of alginate for every 300 grams/ mililiter of water.
- Dip and hold the plasticine dildo in the mixed alginate slurry.
- Wait till the alginate hardens completely (turns white). Then gently and slowly take the plasticine out without destroying the alginate mould. Try to wriggle so as to let air in.
- Add the desired amount of dye to both your A and B component separately till the desired color is reached. Do not add more than 2% of weight. Try to add the same amount to both components.
- After about half an hour (at room temperature) you can demould your dildo.
- We recommend to post cure (place in oven) the dildo for 2-3 hours at 100oC once to make sure it is fully cured. Please be careful and let the dildo cool down first!
1 x 500 gram Alginate 3D-gel
1 x 550 gram Siliconen Addition Transparant 15 Fast set
1 x 250 gram Plasticine for Addition Silicones
1 x mixing cup 1900 ml
1 x mixing cup 550 ml
1 x apron
1 x mixing spatula
1 x 50 gram silicone dye of your choice
