Wax modeling wax Hard 1 kilo
Our modeling wax hard has been specifically designed for the arts sector and sculptures. This wax is suitable for the "lost wax".
The wax can be optimally shaped with tools or by hand. The modeling wax does not stick and is neither grainy nor greasy. Due to its resilience, the wax is not or hardly deformed during removal or storage.
- Solid Modelling
- Good malleable body
- Does not stick
- Not grainy
- Bronze color
- Firm
Technical specifications
- Melting point: 70°C
- Ideal processing temperature: 30-40°C
- Color: dark brown / bronze
Processing
Cut the wax in smaller pieces. To make kneading of the wax easier place it in an oven at (maximum) 40 °C. Optionally, the wax can also be placed under a warm lamp or next to a heat source. Make sure that the temperature during heating is not too high, otherwise the wax may be too soft or even liquid.
Special notes
Avoid in any case overheating (> 100°C) the wax , as this might permanantly negatively affect its properties.
Shelf life
At least 5 years.
Safety requirements
Avoid skin contact with the molten (liquid) wax. Released gases / smoke particles should not be inhaled.
Product information
Product information sheet Wax modeling wax hard 
