Wachs Mikrokristallin LMP Platte
Microcrystalline wax LMP
++BLUE++ This wax is idealy suited to blend with other waxes to lower melting point and hardness and to increase flexibility. ++ENDBLUE++
Description
LMP microcrystalline wax is a real basic wax which can be used for castings but is mostly used to mix with other waxes to decrease melting point and hardness and to increase flexibility of resulting wax.
Technical data
Melting point | 68 ° C | |
Ideal processing temperature | 70 ° C | |
Color | White-yellow | |
Ash content after incineration | <0,03% | |
Penetration @ 25 ° C | 26 dmm (= 2.4 mm) | |
Viscosity @ 100 oC | 13 mPa s |
processing
The wax is melted at a temperature of 70 ° C and poured into an open mold. The professional caster will do so under pressure or vacuum to prevent air bubbles. The wax model is used in the lost wax method. This wax can also be added to other casting waxes such as casting wax red from our shop.
This wax has more shrinkage than a normall casting wax.
special instructions
Avoid overheating (above 100 ° C) the wax at all times. If this is done, this can have a lasting effect on the properties of the wax.
packing
Microcrystalline LMP is delivered in the +/- 1 kg slabs.
Durability
At least 5 years.
safety
Prevent skin contact with the molten (liquid) form of this wax and avoid inhalation of gases / vapors.
++DOWNLOADS++
| Document | Download |
| Product Information |  |
++USP++
- flexible
- much detail
- base wax
- slabs
