Collection
HYDRACAST ™ M463R
industrial investment powders formulated especially for the castings of large, thin wall castings in aluminium and other low temperature non-ferrous alloys under vacuum
€ 64,95 € 53,68 Excl. tax
CompareHYDRACAST ™ CreArt
HYDRACAST ™ Cre'Art is a ready to use, plaster-based, fine grained refractory investment, specially formulated for use in artistic applications.
€ 69,95 € 57,81 Excl. tax
ComparePlaster bandage
Plaster bandages to make support hulls for (alginate) molds.
€ 8,25 € 6,82 Excl. tax
CompareSilicone Addition Gel 840 Water Clear
This silicone gel is extremely suitable for potting and encapsulating of electronics and optical elements that require to be periodically measured after potting.
€ 25,50 € 21,07 Excl. tax
CompareHYDRACAST™ Tradition
HYDRACAST™ Tradition is a ready to use, plaster-based refractory investment for artistic casting using traditional methods, such as manual or mechanical spraying of the investment onto a wax model
18% Sale
56,95 € 66,95 € 55,33 Excl. tax
CompareCondensation silicone DC 3481 R
The Silicone condenation DC 3481 with catalyst 3081 R is idealy suited to make molds for aggressive resins like Epoxy, Polyester and Polyurethane.
€ 108,50 € 89,67 Excl. tax
CompareAcrylic resin Accelerator
With Acrylic resin accelerator you can speed up the curing process of the acrylic resin.
€ 13,50 € 11,16 Excl. tax
CompareSilicone Addition Clear 5 (very soft)
A silicone Clear 5 Set is a set of two component addition cure silicone that very clear slightly yellowish silicone rubber.
€ 34,50 € 28,51 Excl. tax
CompareEpoxy Crystal Clear
A clear epoxy casting system that is UV resistant. This is the easiest clear resin and it is stronger than polyester
€ 35,50 € 29,34 Excl. tax
CompareWax Paraffin B600
Wax Paraffin B600 is a good base wax and is used as a casting wax, or to mix with other wax types. Paraffin wax is a little weaker and shrinks more than microcrystalline wax. Paraffin wax is often whiter than microcrystalline wax.
€ 5,95 € 4,92 Excl. tax
CompareSilicone Addition Wacker M4601
Silicone Addition Wacker M4601 has a good resistance to casting resins (in particular, polyurethane) and low shrinkage. These silicones are very suitable for making strong, flexible and non greasy molds.
0% Sale
46,06 € 46,25 € 38,22 Excl. tax
Compare
